GFCI trips on outdoor circuits are almost always caused by moisture somewhere in the circuit. Colorado’s freeze-thaw cycling works moisture into outdoor outlet boxes, fixture junction boxes, and wiring connections that were properly sealed when installed. We find the moisture intrusion point and fix it properly.

Yes. We diagnose motion sensor failures by checking the sensor itself, the fixture wiring, and the circuit back to the panel. Sensor degradation from UV exposure is common. Sometimes the sensor needs replacement; sometimes it just needs adjustment and cleaning.

It depends on the fixture’s age and condition. A newer fixture with a specific component failure is usually worth repairing. An older fixture that has degraded significantly from UV and thermal cycling is often better replaced with a new unit rated for wet outdoor locations.

Absolutely. Freeze-thaw cycling works moisture into fixture seams and junction boxes that were properly sealed when new. Once moisture gets into an outdoor electrical connection, corrosion and eventual failure follow. We seal and weatherproof every outdoor repair we make.

Most outdoor lighting repairs in Fountain are completed in one to two hours depending on the diagnosis. Tracing and repairing a wiring fault in a damaged conduit run takes longer than replacing a moisture-damaged junction box. We give you a realistic estimate after the assessment.

The cost depends on what the repair actually involves. A simple fixture replacement on a working circuit is a quick job. Tracing and repairing a wiring fault involves more time and materials. We give you a flat-rate price after diagnosing the problem.

Yes. When we repair outdoor lighting in Fountain, we assess the full installation for vulnerabilities and address anything likely to cause problems down the road. Using weatherproof materials and proper sealing techniques significantly reduces the likelihood of future failures.