The most reliable indicator of a hidden leak in a Fountain home is an unexplained increase in your water bill without a corresponding change in usage. Other signs include the sound of running water when all fixtures are off, damp spots on walls or floors, mold or musty odors in areas that should be dry, and warm spots on the floor over a slab, which can indicate a hot water line leak below. WireNut can confirm whether a leak exists and locate it using professional equipment.

A slab leak is a breach in a supply or drain line running beneath the concrete foundation of a Fountain home. They’re caused by corrosion, pipe movement from soil shifting, or manufacturing defects. WireNut locates slab leaks using acoustic listening equipment that detects the sound of water escaping the pipe through the concrete, combined with pressure testing to isolate which line is leaking. This allows us to identify the precise location with minimal concrete cutting needed for the repair.

A pinhole leak in a supply line can waste thousands of gallons per month, which shows up on your water bill before you see any other symptoms. A larger leak or a failed fitting can waste significantly more. In Fountain, where water costs are real, catching a hidden leak quickly through leak detection pays back in water savings in addition to preventing structural damage to the home.

The detection phase itself doesn’t require opening walls or floors. WireNut uses equipment that locates leaks from the surface. The repair that follows may require some demolition depending on where the leak is located, but professional leak detection minimizes how much needs to be opened by identifying the precise location of the leak rather than a general area.

Yes. Buried irrigation line leaks are a common cause of unexplained water bill increases in Fountain homes with landscaping. WireNut can pressure test the irrigation system and use detection equipment to locate leaks in buried lines without excavating the entire yard. Once located, repair is straightforward and significantly less disruptive than discovering the leak by the damage it’s done to landscaping.

Most leak detection calls in Fountain take one to three hours depending on the type of leak suspected and the size of the home. Slab leak detection typically takes longer than an in-wall leak search because of the need to isolate which line is leaking and then pinpoint the location through concrete. WireNut gives you a realistic time estimate when you schedule based on what you’re describing.

WireNut explains exactly where the leak is, what’s causing it, and your options for repair with a specific price for each approach. For most leaks in Fountain homes, WireNut can proceed with the repair immediately after detection in the same visit if you choose to move forward. For more complex situations like slab leaks, we’ll schedule the repair and ensure you understand the scope, cost, and timeline before any work begins.